- Integrated
6IFPF-SFork positioner with separate side shift
Side shift wherever the forks are.
- Capacity
- 1,600–5,000 kg
- Width
- 950–2,000 mm
- Weight
- 208–555 kg
- Load centre
- 500 / 600 mm
6IFPF-S · Integrated
An integrated fork positioner with a separate ±100 mm side shift that moves the whole frame, whatever the position of the forks.
The 6IFPF-S has a built-in, separate side shift of ±100 mm, regardless of where the forks sit in the frame. A dedicated side-shift cylinder moves the entire frame, which matters when the forks are fully out or fully in and you still need to shift sideways.
The side-shift function sits on top of the frame, keeping the view clear and the lost load centre low. A heavy shaft guide gives efficient, precise side shift, and the lower beam gives a large opening range relative to the width.
As on the 6IFPF, the forks are shaft-fitted, with bronze bushes at the top and greasable rollers at the bottom. The valve sits in front of the right mast profile behind a heavy-duty protective plate, and the hydraulic hoses follow common standards.
Every model.
70 models in the catalogue 2026. Choose one to see all its measurements.
On every modelSide shift ±100mm
| Model | P · kgCapacity | a · mmLoad centre | A · mmWidth | C · mmLost load centre | Q · kgWeight | Y0–Y1 · mmOpening range | b×t×L · mmFork section/length |
|---|---|---|---|---|---|---|---|
| 1,600 | 500 | 950 | 145 | 208 | 155–705 | 80×40×1200 | |
| 1,600 | 500 | 1000 | 145 | 211 | 155–755 | 80×40×1200 | |
| 1,600 | 500 | 1050 | 145 | 214 | 155–805 | 80×40×1200 | |
| 1,600 | 500 | 1100 | 145 | 217 | 155–855 | 80×40×1200 | |
| 1,600 | 500 | 1150 | 145 | 220 | 155–905 | 80×40×1200 | |
| 1,600 | 500 | 1200 | 145 | 223 | 155–955 | 80×40×1200 | |
| 1,600 | 500 | 1250 | 145 | 226 | 155–1005 | 80×40×1200 | |
| 1,600 | 500 | 1300 | 145 | 229 | 155–1055 | 80×40×1200 | |
| 2,000 | 500 | 1000 | 145 | 230 | 115–715 | 100×40×1200 | |
| 2,000 | 500 | 1050 | 145 | 233 | 115–765 | 100×40×1200 | |
| 2,000 | 500 | 1100 | 145 | 236 | 115–815 | 100×40×1200 | |
| 2,000 | 500 | 1150 | 145 | 239 | 115–865 | 100×40×1200 | |
| 2,000 | 500 | 1200 | 145 | 242 | 115–915 | 100×40×1200 | |
| 2,000 | 500 | 1250 | 145 | 245 | 115–965 | 100×40×1200 | |
| 2,000 | 500 | 1300 | 145 | 248 | 115–1015 | 100×40×1200 | |
| 2,000 | 500 | 1350 | 145 | 251 | 115–1065 | 100×40×1200 |
- The unit is supplied with the valve placed behind the mast profile
- Min. working pressure 110 [bar]/max. working pressure 250 [bar]
- The table values EH, EV and Q are calculated
- *From 1601 [mm] of fork length, section size is increased
What you get.
- Side shift even with the forks in their outermost or innermost position
- Side-shift cylinder and shaft placed for clear visibility and a low lost load centre, which keeps residual capacity high
- Safety factor 4.5–5.8 as standard, where CE marking requires 3
- Forks on shafts: bronze bushes at the top, greasable rollers at the bottom
Available as options
- e-assist: camera, distance sensor and laser liner
- Many different widths
- Many fork types and lengths, including fork markings
- Telescopic forks
- Load backrest
Per Thomsen
Sales Director and Area Sales Manager
Tell Per about the truck, the load and the job. You get an attachment from the range, or a drawing made for you.
- Phone
- +45 21 23 35 00
- pt@e-l-m.com
Fork positioners for counterbalance trucks
Next attachment
6IFPC
Fork positioner with side shift and consoles
Fork positioners for counterbalance trucks
